Aroma ACM-640D Manual De Instrucciones página 10

Setting the Clock:
Note:
Your coffee maker will not brew coffee until the clock is set and the Power button is
turned on--a coffee cup symbol will appear in the display. This is a safety feature to
prevent the coffee maker from automatically turning on.
1. Place the coffee maker on a clean, dry countertop where it can easily be plugged
into an electrical outlet.
2. Plug the coffee maker into the outlet. The numbers on the LCD display will begin to flash.
3. Set the timer to display the current time. Press the "H" (hours) button until the
current hour is displayed. Press the "M" minutes button until the correct minutes are
displayed. The clock is now set. The a.m./p.m is displayed in the top left corner of
the LCD display.
Using the Auto Preset Function:
To Set the Program Time:
1. Press and hold the Auto button and press the "H" button at the same time to
advance to the desired hour. Make sure the a.m./p.m. times are correct.
2. Press and hold the Auto button and press the "M" button at the same time to
advance to the desired minute.
To Set the Automatic Brew:
1. Press the Auto button and "AUTO" will appear in the upper right corner of the LCD
display (press twice for Strong-Brew function--The word "AUTO" will begin to flash in
the display)
2. The coffee maker will turn on at the programmed time.
3. The timer will automatically shut the coffee maker off 2 hours after the programmed
time.
4. To have the coffee maker brew at the same time the next day, simply refill the water
reservoir and push the Auto button again (press twice for Strong-Brew function--The
word "AUTO" will begin to flash in the display). To change to a different time, repeat
the steps above.
HOW TO USE
7