Tabla de contenido
Publicidad
Brewing Coffee:
1. Swing open pivoting brew basket and place a disposable or permanent gold filter
in basket.
2. Using the measuring spoon, place desired amount of ground coffee into filter. Use
one spoonful of drip grind coffee for each cup of brewed coffee. For stronger or
milder coffee, adjust the amount of coffee to suit your taste.
3. Completely close pivoting brew basket.
4. Fill the carafe with water to the desired level. Use markings on carafe as a guide. Lift
the water reservoir lid and pour water inside. Close the water reservoir lid.
5. Place the empty carafe on the warming plate.
6. Press the Power button to begin brewing (Twice for Strong-Brew Function--coffee
cup icon will begine to flash in the display). Use the Pase n' Serve feature
explained on page 4 if you wish to serve a cup of coffee before the brewing cycle
is complete. Please remember to return the carafe to the warming plate within 45
seconds to prevent overflowing. Afterwards, the coffee will continue brewing.
7. After brewing is complete, wait one minute until the dripping has stopped. Keep the
carafe lid in place for safe serving and to keep coffee warm.
8. After serving, return the carafe to the warming plate. The warming plate will
automatically keep the coffee at an ideal serving temperature as long as the coffee
maker is on.
9. Press the "Power" button to turn the coffee maker off when carafe is empty or
when unit is not in use.
10. To brew another carafe of coffee, first make sure that the unit has been turned off
for 10 minutes to allow the heating element to cool. After the coffee maker has
cooled, dispose of used coffee and rinse carafe in water. Place a new disposable
filter in the pivoting brew basket and add fresh coffee grounds to filter.
NOTE: The amount of brewed coffee will always be less than the amount of water
placed into the coffee maker, as about 10% is absorbed by the coffee grounds and
the filter.
CAUTION:
If the unit is not allowed to cool before immediate repeated use, water placed in the
water reservoir may become overheated and a spray of steam could be released
creating a risk of burns.
HOW TO USE
6
Publicidad
Tabla de contenido
