Service And Warranty - Tiger ONTARIO 5021 Manual Del Usuario

ECO setting (shower mixer faucet) or bath/shower switch (bath mixer faucet):
Shower mixer faucet:
Your shower mixer faucet is equipped with a double shower connection, allowing two separate shower heads to be
used independently of each other. The left-hand connection is suitable for a rainshower (article no. 2789), the right-
hand connection is for attaching a hand shower, which can be stowed in the built-in holder on the right side of the
faucet.
Bath mixer faucet:
The left-hand knob of your bath mixer faucet regulates the water flow between the bath tap and the shower tap.
Turning this knob forward activates the flow from the bath tap. Turning the knob back activates the shower tap. If
desired, you may swing the bath tap under the housing of the faucet.
Features:
Your thermostatically controlled faucet is equipped with:
• Easy-connect S-brackets with built-in one-way valves. This system also ensures that there is no need for
unsightly coupling nuts.
• Polymer thermostat cartridge (Polymer does not bond calcium deposits as much, so it is less sensitive to
malfunctions).
• Ceramic disks.
• Sold brass housing and knobs.
• Bath/shower switch (bath mixer faucet).
• Swivelling bath tap (bath mixer faucet).
• Hot water stop: The hot water supply stops automatically if the (cold) water pressure drops, to prevent
scalding.
Maintenance:
Clean with a soft, damp cloth; do not use abrasive cleaners.
Shut off the cold and hot water supply.
A. One-way valves
Disassemble the mixer faucet. Remove the washer rings from the S-brackets. Then remove the one-way
valves and the dirt filter. Clean all the parts and flush out the pipes. Reassemble all the parts in reverse
order.
B. Thermo-cartridge and/or switch cartridge
Remove the protective cover from the thermostat knob (should be replaced). Disassemble the knob (see
items 7 and 8). Remove the retaining screw using appropriate tools (art. no. 5000.3.60.90, not enclosed).
Remove the cartridge from the housing and clean it. Reassemble all the parts in reverse order. After
maintenance on the thermo-cartridge, it should be recalibrated (see items 6-11).
Draining pipes to prevent freezing:
When draining the water from the pipes, the thermostatically controlled faucet should be drained separately. This is
because there are one-way valves in the connections. To do so, remove the faucet from the S-brackets.

Service and warranty:

Tiger guarantees that your thermostatically controlled shower or bath mixer faucet will work perfectly. In the
unfortunate event that a problem does occur with your faucet, to the extent that it is due to manufacturing and/or
material errors, Tiger will replace the malfunctioning parts free of charge during the five-year warranty period. Should
repair not be possible, the warranty entittles you to a replacement product. Your proof of purchase is also your proof
of warranty and should be submitted with any warranty claims. The drawing on page 22 offers an overview of all the
parts and their article numbers.
-3-