Using The Fireplace Remote App - HOMEDEPOT Home Decorators Collection SP5663 Manual Del Usuario

Using the Fireplace Remote App

Operation
1
To Connect
Turn on the replace.
Switch on Bluetooth on your mobile device.
Tap the side menu icon (Fig. 1).
Tap "+" or "Add" icon (Fig. 2) and start searching for the
replace nearby (Fig. 3).
NOTE:
You can use this app to connect to multiple
replaces.
Tap "FirePlace" in the result. Enter the name of the
replace (Fig. 4) and wait for it to connect (Fig. 5).
Blue dot next to the replace name indicates that the
replace is connected properly and ready to use (Fig. 6).
Return to main page by tapping the side menu icon.
Make sure that the top-right corner icon is switched "ON" (Fig. 7).
Fig. 6
Fig. 7
NOTE:
Only one Fireplace Remote app can connected to
the heater at one time.
NOTE:
If the device fails to connect the heater check that the heater is
powerd on and that bluetooth is enabled on the iOS or Android device.
2
To Disconnect
To remove your replace from your Apple device, tap
the "X" next to the replace name that you want to
remove. (Fig. 8)
To remove your replace from your Android device,
hold down on to the name until the options appear, then
select "Delete". (Fig. 9)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 8
Fig. 9
18
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS