EGO BBA2100 Manual Del Usuario página 12

TROUBLE SHOOTING
EN
PROBLEM
Bristle brush fails to
start.
Bristle brush is obvi-
ously damaged.
Bristle brush stops
while brushing.
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
12
BRISTLE BRUSH ATTACHMENT — BBA2100
CAUSE
◾
The battery pack is not properly attached
to the power head.
◾
No electrical contact between the power
head and the battery pack.
◾
The battery pack is depleted.
◾
The lock-off lever and trigger of the power
head are not depressed simultaneously.
◾
Still not start beyond the above reasons.
◾
Abnormal damage during transportation
or use.
◾
The motor is overloaded.
◾
The battery pack or the power head is
too hot.
◾
The battery pack is disconnected from
the tool.
◾
The battery pack is depleted.
◾
Still not start beyond the above reasons.
SOLUTION
◾
Attach the battery pack to the power
head.
◾
Remove battery, check contacts and
reinstall the battery pack so that it
snaps into place.
◾
Charge the battery pack with an EGO
charger listed in this manual.
◾
Press the lock-off lever and hold it,
then depress the trigger to turn on.
◾
Contact EGO Customer Service.
◾
Contact EGO Customer Service.
◾
The motor will recover when the load
is removed. For continuous work,
decrease the load on the bristle brush.
◾
Allow the battery pack or the power
head to cool until the its temperature
drops below 67°C.
◾
Re-install the battery pack.
◾
Charge the battery pack with an EGO
charger listed in this manual.
◾
Contact EGO Customer Service.