Hardware Installation - Conceptronic CLLCHATCAM Guía De Iniciación Rápida

ENGLISH
Note: When using Windows 2000 or XP, a pop-up message will appear that the
product is not digitally signed or a message about the logo test appears.
Click 'Yes' or 'Continue Anyway' to continue.
When using Windows Vista, a "Windows Security" pop-up message will
appear during installation. Click "Install this driver software anyway" to
continue.
E. When the installation is complete, click "Finish" to continue.
Select the option "Yes, I want to restart my computer now" and click
F.
"Finish" to complete the installation.
5.

Hardware Installation

After the driver installation is completed, you can connect the Lounge'n'LOOK
Chatcam to any available USB port on your PC or on any USB hub attached to your
PC.
To use the microphone, connect the microphone cable to the MIC-In of your
soundcard.
5.1 Windows 2000/XP
A. Windows will prompt a 'Found New Hardware Wizard'. Select 'No, not this
time' and click 'Next'. (Windows XP SP2 Only!)
B. Select 'Install the software automatically (Recommended)' and click
'Next'.
C. A popup message about digital signature or logo test will appear. Click 'Yes'
or 'Continue Anyway'.
D. Click 'Finish' to complete.
Note: We advise to reboot the computer after the webcam installation.
12