Installation & Usage - Conceptronic CLLSPKP21BTB Manual Del Usuario

English
Bluetooth Mode:
 Turn on the speaker. The blue indicator light will flash to detect Bluetooth
enabled devices near you. The blue indicator light will go out if no Bluetooth
device is detected within 5 minutes.
 The Bluetooth device(search code) will be showing on the smart phone, tablet
or PC. Select "CLLSPKP21BTB,CLLSPKP21BTW".
 Play/pause as desired by pressing
 Push to – shortly to select songs upwards, keep pushing to decrease the
volume.
 Push to + shortly to select songs downwards, keep pushing to increase the
volume.
 When you want to play music or movie from another Bluetooth device,
disconnect the speaker and restart the Bluetooth speaker and re-pair.
AUX Mode:
 Turn on the speaker.
 Insert an 3.5mm audio cable into the aux jack on the back of the speaker,
connecting to any audio device such as mobile phones or computers with the
other port of 3.5mm audio cable.
 Play/pause as desired by pressing
 Keep pushing the push button to – to decrease the volume.
 Keep pushing the pushbutton to + to increase the volume.
Note: If you insert an 3.5mm audio cable before the speaker turning on ,then
you need to re-insert the 3.5mm audio cable again ,otherwise ,it is on bluetooth
mode ,can't play music from our audio device.
SPEAKER PHONE Mode:
 Press
to answer an incoming call.
 Press
to hang up.
 Keep pessing
 Double-press
Quick Charging: Charge in power-off state. Insert the attached USB power
Enjoy the use of your Conceptronic Portable Wireless Stereo
4. Installation & usage
to reject an incoming call.
to redial the last phone number.
cable with the micro USB end into the USB power port of the
Bluetooth devices and the other end into the USB port of PC or
the USB charger to start charging. After the charging is over,
the red indicator lamp will be off.
Speakerphone!
.
.