Craftsman 31016 Manual De Usuario
Craftsman 31016 Manual De Usuario

Craftsman 31016 Manual De Usuario

Gabinete bb deslizante de 3 cajones

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OPERATOR'S MANUAL
3-DRAWER BB ROLL-AWAY CABINET
MODEL # 31016
service parts
caLL 1-800-4my-Home or (1-800-366-7278) for service
parts. Refer to Service Parts Drawing for full listing of Service
Parts.
LocatiNG moDeL # iNformatioN
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
capacities
• The maximum weight for each drawer should be no more than
25 pounds.
▪ Empty weight of the unit is 70 lbs
• The maximum product weight, including contents, should be no
more than 300 pounds.
maiNteNaNce
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice yearly.)
• Lubricate lock with graphite, (yearly).
Distributed by Sears Brands Management Corporation, Hoffman Estates, IL 60179
R
Ball bearing slides
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax as to
a car. The wax will also help protect the unit against scratches.
• Grease and oil can be removed with most standard cleaning
fluids. For safety, use a nonflammable cleaning fluid.
• If drawer liners are supplied, it is recommended they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned with soap and
water.
DaNGer
is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WarNiNG
indicates a hazardous situation which, if not
avoided, could result in serious injury or death.
cautioNis used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
cautioN: Read and follow all Safety Rules and Operating
Instructions before first use of this product.
DaNGer
• Do Not stand on this product. You may fall or cause product to
tip.
• Do Not open more than one drawer. The product may become
unstable and tip.
• Do Not step in the drawers. You may fall or cause product to
tip.
• Do Not mount this product on a truck bed or any other moving
object.
• Do Not move the product prior to closing and locking all the
drawers. The drawers could come open and make the product
unstable and tip.
WarNiNG
• Wear safety GLasses when removing or repositioning the
slides.
• Do Not pull this product when moving it. Push the product to
prevent personal injury.
• use tHe BraKes when not moving this product. This will
prevent the product from rolling.
• Do Not alter this product in any manner. For example, do not
weld external lockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• Be carefuL when closing the cover. Remove hands before
the cover closes completely.
cautioN
• This product is not designed to be directly lifted with a fork lift, or
to be towed with any mechanical devices.
• The maximum weight for each drawer should never be exceed-
ed.
• Only transport this product empty. Properly secure when trans-
porting.
• Do Not exceed maximum product weight, including contents.
See Operations Sections: Capacities for more information.
Friction slides
safety
F1847

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Craftsman 31016

  • Página 1 3-DRAWER BB ROLL-AWAY CABINET • Periodically the drawer fronts, drawer trim, and other surfaces MODEL # 31016 should be cleaned with a mild detergent and water. • Auto wax will preserve the unit’s luster finish. Apply the wax as to a car.
  • Página 2: Caster Installation

    HarDWare assemBLy caster iNstaLLatioN items Needed: tooLs requireD: 1/4 - 20 x .438-in (Qty: 16) 3/8” wrench 1/4 - 20 Nut (Qty: 16) Flat-tip Screwdriver Screwdriver 3/8-in Wrench process: Hardware included: • Remove bottom drawers. (See Operation Section, Part • Lay the cabinet on its back. Use packaging material to protect the finish.
  • Página 3 removiNG DraWers friction style - Fully extend the drawer. Insert screwdriver into the slot in the side and push in on the stop until it • Empty the drawer. clears the lance. Pull drawer just past lance before • Fully extend the drawer. releasing stop.
  • Página 4 operatioN to LocK cHest • Insert the lockbar (which stores in the top tray), tabbed removiNG aND iNstaLLiNG sLiDes end up, into the slot in the top tray and down into the slot • To remove the slide from the unit, first remove the in the base.
  • Página 5: Piezas De Servicio

    Correderas de friccion GABINETE BB DESLIZANTE DE 3 CAJONES • Lubrique la cerradura con grafito (anualmente). MODELO NO. 31016 • Limpie con detergente suave y agua los frontales y los bordes laterales de los cajones y las demás superficies. • La cera para automóviles preservará el acabado brilloso de la unidad.
  • Página 6: Herramientas Necesarias

    ferreterÍa eNsamBLaJe iNstaLacioN DeL tiraDor (solo Gabinete) HerramieNtas Necesarias: Llave de 10mm elementos necesarios: Destornillador de punta plana No. 1/4-20 X .438-in Tornillo (Cant.: 16) No. 1/4-20 X Tuerca (Cant.: 16) Destornillador, punta de cruz Llave Inglesa de 3/8-in (Llave de 10mm) proceso: piezas iNcLuiDas: •...
  • Página 7 remociÓN De Gavetas estilo fricción - extienda completamente la gaveta. Inserte el destornillador en la ranura del costado y presione el tope hasta • Vacíe la gaveta. que libere el rejón. Hale la gaveta justo después del rejón antes • Abra completamente la gaveta. de liberar el tope.
  • Página 8 fuNcioNamieNto cerrar eL BaúL • Insertar la barra de cierre (ubicada en la bandeja superior), con la pestaña final hacia arriba, dentro de las ranuras de la iNstaLaciÓN y DesiNstaLciÓN De correDeras bandeja superior y de la base. Cierra las tapas y usa la llave •...

Tabla de contenido