ASROCK FM2A88X Extreme6+ Manual Del Usuario página 20

2.4 Expansion Slots (PCI and PCI Express Slots)
There are 2 PCI slots and 5 PCI Express slots on this motherboard.
Before installing an expansion card, please make sure that the power supply
is switched off or the power cord is unplugged. Please read the documenta-
tion of the expansion card and make necessary hardware settings for the
card before you start the installation.
PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
PCIE Slots:
PCIE1 / PCIE3 (PCIe 2.0 x1 slot) is used for PCI Express cards with x1
lane width cards.
PCIE2 / PCIE4 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane
width graphics cards.
PCIE5 (PCIe 2.0 x16 slot) is used for PCI Express x4 lane width cards.
PCIe Slot Configurations
Single Graphics Card
Two Graphics Cards in
CrossFireX
Three Graphics Cards in
3-Way CrossFireX
1. For a better thermal environment, please connect a chassis fan to the
2. When PCIE2 slot is occupied, the DisplayPort cannot be used.
3. If you want this motherboard to support graphics card and DisplayPort
20
TM
Mode
TM
Mode
motherboard's chassis fan connector (CHA_FAN1, CHA_FAN2 or CHA_
FAN3) when using multiple graphics cards.
outputs simultaneously, please install the graphics card on PCIE4 slot.
PCIE2 PCIE4
x16 N/A
x8 x8
x8 x8
PCIE5
N/A
N/A
x4