ASROCK FM2A88X Extreme6+ Manual Del Usuario página 25

Chassis and Power Fan Connectors
(4-pin CHA_FAN1)
(see p.3 No. 17)
(3-pin CHA_FAN2)
(see p.3 No. 28)
(3-pin CHA_FAN3)
(see p.3 No. 30)
(3-pin PWR_FAN1)
(see p.3 No. 2)
CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.3 No. 3)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
(3-pin CPU_FAN2)
(see p.3 No. 4)
ATX Power Connector
(24-pin ATXPWR1)
(see p.3 No. 7)
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
CHA_FAN_SPEED
+12V
FAN_SPEED_CONTROL
GND
+12V
GND PWR_FAN_SPEED
FAN_SPEED_CONTROL
CPU_FAN_SPEED
+12V
GND
1 2 3 4
GND
+12V
CPU_FAN_SPEED
12 24
1 13
20-Pin ATX Power Supply Installation
FM2A88X Extreme6+
Please connect the fan cables
to the fan connectors and
match the black wire to the
ground pin. CHA_FAN1/2/3 fan
speed can be controlled through
UEFI or A-Tuning.
Please connect the CPU fan
cable to the connector and
match the black wire to the
ground pin.
Pin 1-3 Connected
3-Pin Fan Installation
Please connect an ATX power
supply to this connector.
12
1
24
13
25