Leica Geosystems KL122 Manual De Empleo página 40

Power supply:
• Mains connection
• Vehicle connection
3
Input voltage:
• 100 - 240 V ~ (+10/-15%), 50/60Hz
23
• 12 - 24 V
Vehicle supply system (9 - 32 V
Charging power:
• 16.8V
max. / 2.5A max.
(depending on type of battery),
20 VA max.
Rated capacity:
Operating environment:
• Only for use in dry rooms
(buildings or vehicles)
Temperature range:
• Storage:
-40°F to +158°F
• Operating:
• Battery: normal charging
0°C to +10°C (+32°F to +50°F)
10°C to +50°C (+50°F to +122°F)
Charging modes:
• Quick-charging:
> For Leica standard batteries
with four contacts and Leica
batteries with 5-pin charging
connector, with temperature
monitoring and battery
)
identification. Charging current
max. 2.5A (depending on
battery)
> For Camcorder batteries with 3
contacts and temperature
monitoring. Charging current
48 VA
max. 1.8A
(On adapter plate camcorder
batteries with 3 contacts cannot
be charged)
• Conservation of charge:
-40°C to +70°C
For all batteries specified under
"charging modes" (see above).
0°C to +35°C
Charging current depending on
+32°F to +95°F
battery (per minute 15 seconds
with C/64).
quick charging
Charging technology:
• Quick-charging:
Disconnecting by:
- negative voltage difference
- temperature rise per minute
- battery temperature
- timer
• Conservation charging current:
Monitoring battery voltage,
charging current and battery
temperature
Configuration:
• Sequential quick charging of up to
2 Leica standard batteries (with
adapter plate sequential quick
charging of 4 Leica standard
batteries)
• Sequential quick charging of up to
2 batteries with 5-pin plug.
• Sequential quick charging of up to
2 camcorder batteries with 3
contacts.
40