8.2.5 Connection via Digital Input port
Ruptela Eco FLS and Pro FLS can be connected to the Ruptela FM device via Digital Input port,
which is configured as Frequency input port. For that, one of the FM device's Digital Inputs
(DIN1 or DIN2) has to be configured as a Frequency Input. In order to ensure successful
operation, DIN wire has to be additionally connected to the GND wire via 2,4 kΩ resistor.
Wiring scheme described below:
Wire
colours
Black
Red
Pink
Figure 66 . Connection via DIN.
Description
Chassis
Power
supply
DIN1
--
wire colours
Black
Red
Grey/White
--
Description
GND
Vcc
A/F