Attach Handle - Hoover Taskvac H-8581 Manual De Usuario

CAUTION! To reduce the risk of damage:
• Avoid picking up hard, sharp objects with this
product, as they may cause damage.
• Store in a dry place. Do not expose vacuum to
freezing temperatures.
• Brushroll continues to turn while product is turned on
and handle is in upright position. To avoid damage
to carpet, rugs, furniture and flooring, avoid tipping
cleaner or setting it on furniture, fringed area rugs or
carpeted stairs during tool use.
• Do not use sharp objects to clean debris from hose,
as they can cause damage.
CAUTION! This appliance must be grounded.
If it should malfunction or break down,
grounding provides a path of least resistance
for electrical current to reduce the risk of
electric shock.
NOTE: The appliance is equipped with a
cord having an equipment-grounding
conductor and grounding plug. The plug
must be plugged into an appropriate outlet
that is properly installed and grounded
in accordance with all local codes and
ordinances.
Handle
Base

ATTACH HANDLE

NOTE: Remove the screw at the top of the
vacuum base and set aside until Step 2.
1. Insert handle into vacuum base. Push down firmly.
(See Figure 1)
2. Using a Phillips screwdriver, fasten screw behind
handle into vacuum base. (See Figure 2)
PAGE 2 OF 24
SAFETY CONTINUED
ASSEMBLY
Crevice Dusting/Upholstery
Tool
Wand
Improper connection of an equipment-grounding
conductor can result in risk of electric shock. Check
with a qualified electrician or service person if doubting
whether the outlet is properly grounded. Do not modify
the plug provided with the appliance. If it does not fit
the outlet, have a qualified electrician install a proper
outlet.
This vacuum is for use on a nominal 120V circuit
and has a grounding plug that looks like the plug
illustrated in Figure A. A temporary adapter that looks
like the adapter illustrated in Figure B may be used to
connect this plug to a two-pole receptacle, as shown,
if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly
grounded outlet, Figure A, can be installed by a
qualified electrician. The green-colored rigid ear, lug or
the like extending from the adapter must be connected
to a permanent ground, such as a properly grounded
outlet box cover. Whenever the adapter is used, it must
be held in place by a metal screw.
Figure A
Screw
Tool
Figure 1
Figure B
Bag Door Disposable Bag
Figure 2
0821 IH-8580