Attach The Wall Bracket - Hoover CRUISE Manual Del Usuario

Attach the wall bracket:

Attach the wall
bracket to the handle.
1
Use both screws and screw
covers to secure the wall
bracket to the wall. Place
covers over the screws.
4
8
First, fully assemble the vacuum but do not attach the battery.
With the wall bracket
attached, stand the
vacuum close to the wall,
in the upright position with
the Powered Nozzle flat on
the floor.
2
Firmly press the vacuum
handle into the wall
bracket to secure.
5
Holding the wall bracket
firmly in place, carefully
remove the vacuum.
Using a pencil make a small
mark for each screw.
3
The tools can be stored on
the wall bracket.
6