Textron Greenlee AKM Serie Manual De Instrucciones página 4

IMPORTANT SAFETY INFORMATION
Extension cords:
• Use only three-wire, 12-gauge
extension cords that have three-
prong grounding-type plugs and
three-hole receptacles that accept
the tool's plug.
• Do not use extension cords that
are longer than 30 m (100').
• Repair or replace damaged
extension cords.
Failure to observe these warnings
could result in severe injury or death.
Pinch points:
Keep hands away from bending
shoe, rollers and conduit when
bender is in use.
Failure to observe this warning could
result in severe injury or death.
Unplug the bender before changing accessories.
Accidental start-up could result in serious injury.
Adjust fork spacing to match fork tubes on bender.
Ensure caster brakes are locked and casters are
straight before inserting forks into fork tubes.
Forks must extend beyond ends of fork tubes a
minimum of 8".
Failure to observe this warning could result in severe
injury or death.
Do not operate the bender while wearing loose
clothing. Loose clothing can get caught in moving
parts.
Failure to observe this warning could result in severe
injury or death.
Greenlee / A Textron Company
Do not use as a step or ladder.
• Inspect the bender before each use. Replace worn,
damaged, or missing parts with Greenlee replace-
ment parts. A damaged or improperly assem-
bled component could break and strike nearby
personnel.
• Do not overbend the conduit or pipe. Overbending
could cause a hook to collide with the conduit or
pipe, resulting in damage to the bender.
• Conduit moves rapidly as it is bent. Before starting
a bend, remove any obstructions from the path of
the conduit.
• Some of the components and accessories are
heavy and may require two people to lift and
assemble.
• Use this tool for the manufacturer's intended
purpose only.
Failure to observe these precautions may result in
injury or property damage.
Note: Keep all decals clean and legible, and replace
when necessary.
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
854 Quad Bender