Maxx air HVFF 20 Instrucciones De Operación

CONGRATULATIONS ON YOUR PURCHASE OF THE
MaxxAir™ 20" HIGH VELOCITY FLOOR FAN.
With proper care and maintenance the fan will a ord you
many years of use. Please read the safety instructions
below, and save for future reference.
THIS FAN IS FOR RESIDENTIAL USE ONLY.
GENERAL SAFETY INFORMATION
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of re, electric shock, and
injury to persons, including the following:
1. Read all instructions before using the Fan.
2. Make certain that the power source conforms to the
electrical requirements of the Fan.
3. Use the Fan only as described in these instructions. Any
other use not recommended by the manufacturer may
cause re, electrical shock or injury to persons.
4. To reduce the risk of personal injury and electric shock,
the Fan should not be played with or placed where small
children can reach it.
5. Unplug power cord before installing, servicing or
moving the Fan. Warning: Do not depend upon the
on-o switch as the sole means of disconnecting
power when installing or servicing the fan. Always
unplug the power cord.
6. This Fan must NOT be used in potentially dangerous
locations such as ammable, explosive, chemical-laden
or wet atmospheres.
7. DO NOT use Fan in or near a window. Rain may create
an electrical hazard.
8. Completely assemble the Fan according to the
assembly instructions on the reverse of this page before
connecting to power supply. Warning: this appliance
has a polarized plug (wide blade of plug to wide slot,
fully inserted). If the plug does not t fully into the
outlet, reverse the plug. If it still does not t, contact a
quali ed electrician. Do not attempt to defeat this
safety feature. Warning: this plug is a safety device.
To reduce the risk of re, shock, and personal injury,
do not remove, replace, repair or tamper with the
originally supplied plug. If the fan does not function
properly, it may be due to the safety device incorpo-
rated in this plug. Call 800-433-1626, monday-friday,
between 8:00 a.m. And 5:00 p.m. CST. If the plug
warning label is missing or damaged, call the toll free
number for a replacement label.
9. Where possible, avoid the use of extension cords. If
they must be used, minimize the risk of overheating by
ensuring that they are UL listed. Never use a single
extension cord to operate more than one Fan. Do not
VENTAMATIC, LTD. P.O. BOX 728, MINERAL WELLS, TX 76068-0728 • PHONE 800-433-1626 FAX 940-325-9311 • WWW.BVC.COM • E-MAIL: BVC@BVC.COM
A leader in the ventilation industry for over 60 years, Ventamatic, Ltd. o ers a complete line of air movement
products for commercial, industrial, agricultural, and residential use sold under these ne names:
20" HIGH VELOCITY FLOOR FAN
OPERATING INSTRUCTIONS
MODEL: HVFF 20
plug the Fan into any other cord-connected device such
as a power strip, cord reel, surge protector, multiple
outlet adapters or outlet-type air fresheners. The use of
such devices may create a re hazard.
10. Do not operate any Fan with a damaged cord or plug
or after the Fan malfunctions, has been dropped or
damaged in any manner.
11. Do not insert or allow ngers or foreign objects to
enter any ventilation or exhaust opening, as it may cause
an electric shock, re or damage the Fan. Do not block or
tamper with the Fan in any manner while it is in operation.
12. Always place the Fan on a stable, at, level surface
when operating to avoid the chance of the Fan overturn-
ing. Locate the Power Cord so the Fan or other objects are
not resting on it. Do not run Power Cord under carpeting.
Do not cover Power Cord with throw rugs, runners, or the
like. Arrange Power Cord away from room tra c and
where it will not be tripped over.
13. This Fan is not intended for use in wet or damp
locations. Never locate a Fan where it may fall into a
bathtub or other water container.
14. Do not use Fan outdoors.
15. This Fan is not suitable for use in agricultural facilities
including areas where livestock, poultry or other animals
are con ned. Please refer to National Electric Code ( NEC)
Article 547-7 (2008) or applicable state or local codes or
standards relating to electrical requirements for
Agricultural Buildings. THIS FAN DOES NOT MEET THE
REQUIREMENTS OF NEC ARTICLE 547-7 (2008).
16. This Fan is not suitable for use in hazardous locations.
Please refer to National Electric Code (NEC) Article 500 or
applicable state or local codes or standards relating to
electrical requirements for Hazardous locations. THIS FAN
DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLES
500 (2008).
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK. DO NOT USE THIS FAN WITH ANY
SOLID STATE SPEED CONTROL DEVICES.
SAVE THESE INSTRUCTIONS
®
®