Searching For Signals - Sempre 92596 Manual Del Usuario

USA
Preparing the base unit for use
The display
sound once the power adaptor has been connected
to a socket. Wait for about 30 minutes. During this
time the base unit gathers the weather data and
receives the time signals (see chapter "Searching for
signals").

Searching for signals

Once the base unit has been powered, it will start
searching for weather data and time signals:
1. The base unit will first detect the air pressure for
about 20 seconds. During this time, the value of air
pressure will blink in the air pressure display area
− Press the SET button
detection.
2. The base unit will then search for weather data from
all available radio sensors. During this time, the
reception icon (
data") blinks in the outdoor weather display area
indicating the base unit is searching for the weather
data.
− When the weather data have been successfully
received, the reception icon will turn off and the
current weather data will show in the outdoor
weather display area.
− When no weather data have been received, the
reception icon will turn off and no outdoor weather
data will be available.
− In case of an unsuccessful search for weather data,
22
1 855 754 8297
USA
will turn on and an alarm tone will
2
if you want to stop the
5
or )
49
Aldi-US@Supra-elektronik.com
(see chapter "Weather
.
30
,
29