Thrustmaster T-X3 Manual Del Usuario página 3

WARNING
• Before using this product, please read through this documentation carefully and keep it for later
consultation.
• Keep the product in a dry place and do not expose it to dust or sunlight.
• Be sure to respect the polarities.
• Do not twist or pull too hard on the connectors and cables.
• Do not spill any liquid on the product and its connectors.
• Do not short-circuit this product.
• Never use any other adapter than the power adapter included with the TX-3.
• Do not disassemble this product, nor set it on fire.
• If your T-X3 will not be used for an extended period of time, power it off by setting the On/Off switch
(5) to the Off position.
GETTING TO KNOW YOUR "T-X3 CHARGE HUB"
The "T-X3 CHARGE HUB" is the first PlayStation® 3 accessory allowing you to:
- recharge 2 SIXAXIS™ or DUALSHOCK®3 controllers, even when the console is powered off.
- add 3 powered USB 2.0 ports to your console.
The TX-3 is powered directly via the rear of the console and is therefore compatible in all countries, with
all types of power supply (from 100 to 240V), and with all PlayStation® 3 models.
The USB hub is Hi-Speed and powered, guaranteeing 100% compatibility with all accessories which
connect to a PlayStation® 3: PSP™, guitars, webcams, microphones, guns, USB keys, joysticks,
gamepads, racing wheels, etc.
THE "T-X3 CHARGE HUB" LED
Use the On/Off switch (5) to power on or completely power off the TX-3.
• BLUE LED = the T-X3 is powered on.
• LED OFF = the T-X3 is powered off.
2/8