Upright XRT27E Electric Manual Del Operador página 10

A
Electrocution Hazard Electrocution Hazard Electrocution Hazard Electrocution Hazard
THIS MACHINE IS THIS MACHINE IS
THIS MACHINE IS THIS MACHINE IS
NOT INSULATED NOT INSULATED NOT INSULATED NOT INSULATED
P
!
Never operate the work platform with the parking brakes released. Serious
injury or damage could result.
10
U E D
FTER SE ACH AY
1. Ensure that the platform is fully lowered.
2. Park the machine on a firm, level surface, preferably under cover, secure against vandals, chil-
dren and unauthorized operation.
3. Turn the key switch to OFF and remove the key to prevent unauthorized operation.
This machine is not insulated. Follow your national safety standards and maintain the
required safety distance when working near energized equipment.
B R
ARKING RAKE ELEASE
Perform the following only when the machine will not operate under its own power and it is neces-
sary to move the machine or when winching onto a trailer to transport. Never release brakes if
machine is on a slope. Hook machine to towing vehicle before releasing brakes.
1. Turn the Platform/Chassis/Brake Release switch to
BRAKE RELEASE. Alarm will sound.
2. Momentarily push BRAKE RELEASE button.
3. The machine will now roll when pushed or pulled.
4. Turn the Platform/Chassis/Brake Release switch to
PLATFORM or CHASSIS for normal parking brake
function.
W A R N I N G
PLATFORM/CHASSIS/BRAKE
RELEASE SWITCH
!
Figure 8: Brake Release
BRAKE RELEASE BUTTON
XRT Electric