Thank you for purchasing an auger tip for
your RYOBI
drain auger. More auger tips are
™
available at www.ryobitools.com or where you
purchased this product. Refer to the Auger
Tip Selection Guide for information about
which tip to choose.
NOTE: This auger tip is compatible with the
P4002 RYOBI
drain auger only.
™
WARNING:
To reduce the risk of injury, do not attempt
to use this product until you have read
thoroughly and understand completely
this operator's manual and the operator's
manual for the P4002 RYOBI
Ensure compatibility and fit before using
this accessory. Do not use this accessory
if a part is damaged or missing.
INSTALLING AUGER TIPS
See Figures 1 - 2.
Remove the battery pack or power cord
from the tool.
Hold the cable and pull the collar back.
Slide the auger tip into into the cable's
T-slot.
Push the collar forward so that the tip is
secured properly. Check to see that the
tip is secure.
To remove an auger tip:
Remove the battery pack or power cord
from the tool.
Hold the cable and pull the collar back.
Remove the auger tip by sliding it out of
the T-slot in the collar.
AUGER TIP SELECTION GUIDE
drain auger.
™
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625
1-800-525-2579 • www.ryobitools.com
Bulb Tip
Helps clear away obstructions
and residue; used for generic
purpose cleaning in drains up
to 2 in. wide.
Grease Tip
Helps penetrate through
grease blockages in drains up
to 2 in. wide.
Spade Tip
Helps break through tough
blockages in drains up to 2 in.
wide.
Side Cutter
Helps extract grease build-up
and residue from sides of pipe
up to 2 in. wide.
Fig. 1
A - P4002 drain auger (P4002 dégorgeoir pour
tuyauterie, P4002 barrena de drenaje)
B - Cable (câble, cable)
Fig. 2
A
C
A - Cable (câble, cable)
B - T-Slot (encoche en T, ranura en T)
C - Auger tip (bout du furet, punta de la barrena)
A
B
B
995000493
12-8-17 (REV:01)