Parts Identification; Charging - Panasonic EW1511 Instrucciones De Operación

P arts identifi cation
A Front Back
f
a
b
c
d
e
g
h
i
j
k
A Main unit
a Power switch ( )
b Level switch
c Water pressure level LED
indicator (1~5 levels)
d Low battery indicator (blue)
e Charge status indicator (red)
f Nozzle release button
g Water tank (Inside)
h Water tank cap
i Suction hose
j Filter
k Bottom cover release button
l Bottom cover
B AC adaptor (RE7-87)
(The shape of the power
plug differs depending
on the area. One of
the power supply units
specifi ed is provided with
10
EW1511.indb 10
B
m
n
o
p
C
r
t
q
s
D
E
u v w
l
this appliance.)
m Adaptor
n Power plug
o Cord
p Appliance plug
C Charging stand (RC8-4)
q Charging plug
r Nozzle stand
s Screw holes for wall mounting
The charger can be mounted
on a wall using two wood
screws.
t Stand socket
D Nozzle (×2)
•
The nozzle is a consumable.
u Nozzle
v Nozzle Handle
w Identifi cation ring
Accessory
E 2 screws
Note
There may be moisture inside the main unit (water tank
and suction hose) left from the distilled water used for
product testing.

Charging

1
Connect the AC adaptor.
1 Insert the appliance plug fi rmly to the stand
socket.
 Press the cord into either the left or right groove,
depending on where it will be placed.
• Place the charging stand on a fl at and stable
surface.
 Insert the adaptor into a household outlet.
Stand socket
1
Groove
2
3
2019/3/28 20:44:38