Regalo 4010 HD Manual De Instrucciones página 8

Mounting Your Bed Rail to the Bed
NOTE: The following step may require the help of an additional person.
STEP 1
Remove the mattress from the bed and place the bed rail on top of the box
spring that supports the mattress. The straps and anchors should be extended
opposite the bed rail and mounted to the other side of the box spring.
You may need to release the strap locking buckles located on the
under side of the guide arm assemblies.
NOTE: Ensure that the large end
of the anchor is pointing up. The
anchoring straps should not be
twisted. If twisted, the anchoring
straps will not tighten properly.
8 English