Re-allow the temperature to increase and the steam
ready light will re illuminate (9)
The steam output can be adjusted by the variable
steam control (2)
Choose and fit the required accessory to the hose
handle.
When changing accessories during use please
note these will be hot!!
During Use
Cold water tank empty
Refill the cold water tank (1) when the refill cold
water LED (10) is illuminated.
A buzzer will sound and the steam will no longer
come out of the nozzle when the steam switch on
the handle is pressed.
The pumps will not work when the cold-water tank
is empty.
Once the cold water refill LED is illuminated the
boiler heater will remain on for 30 minutes. If the
cold-water tank is not refilled within 30 minutes
and the machine is left powered on the boiler
heater will switch off.
Storing the hose after use
On completion remove the hose from the front of
the machine and store in basket/bag provided,
once cooled.
Safety Precautions
Warning
This machine is to be used by trained
operatives only
DO
• Check the cable and plug are safe and intact
before plugging the machine in.
• Place cleaning in progress signs where
necessary
• Point the steam nozzle away from your body
during use
• Empty and clean machine after each use
DON'T
• Use the machine near people, children or
animals
• Point steam at electrical apparatus
• Use the machine to clean the machine down
• Do not use on Velvet, satin or leather
• Leave the machine unattended
Maintenance
The maintenance of the machine is a prerequisite for
impeccable operation and a long service life.
Use original MATRIX parts only; otherwise, any
warranty and liability claims will expire.
In order to rule out unintended machine functions,
before starting maintenance works the following
must always be carried out
-
the machine must be switched off,
Daily Maintenance
To be carried out every day or every 8 hours of
operation.
1. Grease "O" rings on the steam pin in the
steam hose.
2. Wipe down the body of the machine with a
clean damp cloth
3. Always wash the accessories in hot soapy
water. (Do not immerse the machine or
hose in water)
4. Wrap the power cable up before storing
away.
Weekly Maintenance
To be carried out every week or every 50 hours of
operation.
As for daily maintenance plus the following:
1. Inspect the power cable for any signs of
damage. If damaged do not repair, contact
the supplier of this product. Do not use
until repaired.
2. Inspect the hose assembly for any signs of
damage. If damaged do not repair, contact
the supplier of this product. Do not use
until repaired.
3. Inspect castors to ensure all securing bolts
are fully tightened.
42
Caution
Notice