Thank you for purchasing these auger tips for
your RYOBI
drain auger. More auger tips are
™
available at www.ryobitools.com or where you
purchased this product. Refer to the Auger
Tip Selection Guide for information about
which tip to choose.
NOTE: These auger tips are compatible with
the P4003 RYOBI
drain auger only.
™
WARNING:
To reduce the risk of injury, do not attempt
to use this product until you have read
thoroughly and understand completely
this operator's manual and the operator's
manual for the P4003 RYOBI
Ensure compatibility and fit before using
this accessory. Do not use this accessory
if a part is damaged or missing.
INSTALLING AUGER TIPS
See Figures 1 - 2.
Remove the battery pack or power cord
from the tool.
Hold the cable and pull the collar back.
Slide the auger tip into into the cable's
T-slot.
Push the collar forward so that the tip is
secured properly. Check to see that the
tip is secure.
A1224PK
To remove an auger tip:
Remove the battery pack or power cord
from the tool.
Hold the cable and pull the collar back.
Remove the auger tip by sliding it out of
the T-slot in the collar.
AUGER TIP SELECTION GUIDE
drain auger.
™
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622
1-800-525-2579 • www.ryobitools.com
Bulb Tip
Helps clear away obstructions
and residue; used for generic
purpose cleaning in drains up
to 3 in. wide.
Grease Tip
Helps penetrate through
grease blockages in drains up
to 3 in. wide.
Spade Tip
Helps break through tough
blockages in drains up to 3 in.
wide.
Retrieving Tool
For removing objects from
drains up to 3 in. wide and
bringing them to the surface.
Fig. 1
A - P4003 drain auger (P4003 dégorgeoir pour
tuyauterie, P4003 barrena de drenaje)
B - Cable (câble, cable)
Fig. 2
A
C
A - Cable (câble, cable)
B - T-Slot (encoche en T, ranura en T)
C - Auger tip (bout du furet, punta de la barrena)
A
B
B
995000791
1-15-19 (REV:01)