Troubleshooting - PROZIS DYNA Manual Del Usuario

EN
Maintenance and storage
• Do not expose the scale to high temperatures or high humidity.
• Do not overload the scale to avoid damaging the sensor.
• Do not place heavy objects on the scale when it is not in use.
• Do not store the scale in an upright position.
• Do not jump or step on the scale.
• Do not drop the scale.
INSTRUCTIONS
Powering up the scale
Rotate the Twist Knob to power up the scale. It needs to be rotated at
least 120 degrees.
Weighing
1
1. Place the scale on a stable, flat surface.
2. Rotate the Twist Knob at least 120 degrees. The number 0 will be displayed.
3. Place the food on the platform. The display will show its weight.
Tare function
1
1. With the scale powered up, place a container on the platform. The weight of the container
will be shown on the display.
6
2 3
2 3
TARE
2. Press the [TARE] button to subtract the weight of the container, resetting the value on the
display to 0. When adding food to the container, the display will now show the weight of
the food only. Should you wish to add more items that need to be weighed separately,
please repeat this step.
3. After using the Tare function to reset the displayed weight to 0, removing the container
from the scale will cause a negative value to be shown on the display. The value can be
reset to 0 by pressing the [TARE] button again.
Kcal function
1 2
The scale can calculate the energy value for seven different foods: chicken, butter, sugar,
flour, eggs, chocolate and beef.
1. Weigh one of the above foods according to the previously described procedure.
2. Press the [KCAL] key that matches the chosen food. The display will show its estimated kcal
content.
3. When in Kcal mode, press the [UNIT] key to exit this mode and return to Weighing mode.

Troubleshooting

Some issues that may arise can be solved by the user. If the problem persists after having
tried the following solutions, please contact Prozis customer service.
ERROR MESSAGE CAUSE
The scale has insufficient power.
The scale is on an unstable
surface.
The scale is overloaded.
EN EN
3
SOLUTION
Rotate the twist knob to generate
more power.
Place it on a better-suitable
surface.
Remove excess weight from the
scale. It will function normally with
less than 5000 g.
7 7