Installation
STEP 3 Door removal for entrance
If the refrigerator cannot pass through the entrance due to its size, follow these
instructions:
Tools required (not provided)
These tools are used for removing the doors.
Phillips screwdriver
Socket spanner (3/8" (10 mm))
Disconnect the water line (Dispenser models only)
32
English
Untitled-14 32
Flat-head screwdriver
Allen spanner (1/4" (5 mm))
1. From the bottom rear side of the
refrigerator, pull out the water line to
the front.
NOTE
The refrigerator's water line is a water
circulation line that connects between the
water pipe from the water source and the
hoses from the water filtering system of
the refrigerator.
2019-12-17 PM 4:16:50