DJI T Serie Guia Del Usuario página 5

3. Locate the EMF/Liquid Level port on the spray control board. Remove the M2.5×8 screws on the cable
connector, and then unplug the cable and place it in the space near the aircraft frame. The location and
structure of the spray control board are different on the T20 and T16. Refer to the figures below for more
information.
T20
T16
4. Detach the spread tank and the spreader: Pull the spreader lock knob out, rotate it 90°, and release. Next,
rotate the spreader to detach it.
2
1
3
© 2020 DJI All Rights Reserved.
4
Locked Unlocked