Tool Specifications; Operating Controls; Intended Use; Initial Operation - Würth master HLG 1800 Instrucciones Para El Manejo

HLG 1800..2300 - GB Seite 11 Donnerstag, 10. November 2005 5:02 17
Hot air gun
Article number
Voltage [V~/Hz]
Output [W]
Settings
Air volume [l/min]
Temperature [°C]
Temperature adjust-
ment/Indicator
Weight, approx. [kg]
Protection class
* Article not available in all countries!

Operating controls

1 Air outlet
2 Heat protection
3 On/Off and cool air – hot air switch
4 Infinite temperature control (HLG 2000)
5 Scale (HLG 2000)
6 Memory button (HLG 2300-LCD)
7 Buttons for temperature adjustment
(HLG 2300-LCD)
8 LC display (HLG 2300-LCD)
9 Buttons for air volume control (HLG 2300-LCD)
10 Program selection switch (HLG 2300-LCD)
Not all of the accessories illustrated or described are included
as standard delivery.

Intended Use

The tool is intended for the deforming and bonding
plastic, for removal of paint coatings and for
heat-shrinking of sleeves. It is also suitable for sol-
dering and tinning, for loosening of glued connec-
tions and for thawing of water lines.
For damage caused by usage other then intended,
the user is responsible.

Tool Specifications

HLG 1800*
0702 201 X
230/50
1800
I II III
200 300 500 150
50 400 600 50
–
0.78
Always use the correct supply voltage: The power
supply voltage must match the information quoted
on the tool identification plate.
HLG 1800/HLG 2000:
Switching On / Off (cool air – hot air)
The On/Off switch 3 has 3 settings:
I
II
III
In the cool air position, the unit is suitable for cooling
down a heated workpiece, the hot air gun itself, or
for drying paint.
Adjusting the Temperature
HLG 1800: The hot air temperature is preset in both
hot air positions and cannot be adjusted.
Hot air position I: 400 °C
Hot air position II: 600 °C
HLG 2000: With the infinite temperature control 4,
the temperature can be adjusted from 50 - 600 °C
in both hot air positions. The scale 5 can be used for
guidance:
Setting 1: Temperature approx. 50 °C
Setting 9: Temperature approx. 600 °C
In the cool air position, the temperature cannot be
adjusted.
HLG 2000* HLG 2300-LCD*
0702 202 X
230/50
2000
I II III
300 500
50 - 600
infinite /scale 10°C - steps/LC display
0.87
/ II

Initial operation

Cool air position, blower stage I
Hot air position I, blower stage II
Hot air position II, blower stage III
0702 203 X
230/50
2300
I/II
150...500
50...650
0.95
11