Maintenance And Cleaning; Noise/Vibration Information; Declaration Of Conformity - Würth master HLG 1800 Instrucciones Para El Manejo

HLG 1800..book Seite 13 Donnerstag, 10. November 2005 11:33 11

Maintenance and Cleaning

Before any work on the tool itself, pull the mains
plug.
For safe and proper working, always keep the
tool and the ventilation slots clean.
Avoid sucking in dust or sawdust, as this will
cause the tool to malfunction.
If the machine should fail despite the care taken in
manufacturing and testing, repair should be carried
out by a Würth Master-Service agent.
For all correspondence and spare parts orders,
always include the article number on the type plate
of the machine.
For the current spare parts list of this machine, log into
the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest
Würth branch office.
Disposal
Power tools, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical
and electronic equipment and its
incorporation into national law, power tools that are
no longer suitable for use must be separately col-
lected and sent for recovery in an environmen-
tal-friendly manner.
Warranty
For this Würth tool, we provide a warranty in
accordance with statutory /country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has
occurred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can be recognised only when the tool is pre-
sented undisassembled to a Würth branch office or
a Würth field service employee.

Noise/Vibration Information

Typically the A-weighted sound pressure level of the
tool is 70 dB (A).

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization
60 335-2-45,
EN 55 014-2,
according to the provisions of the regulations
73/23/EEC, 89/336/EEC.
05
Adolf Würth GmbH & Co. KG
P. Zürn
Subject to change without notice
documents: EN 60 335-1,
EN 50 366, EN 55 014-1,
EN 61 000-3-2, EN 61 000-3-3
R. Bauer
13