Tabla de contenido
Publicidad
10. ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device in water or other liquids.
11. Under no circumstances should the housing be opened.
12. When in use do not look directly at the emitter.
13. The device heats up to extremely high temperatures. Even after work, the device may remain hot for
some time. Do not touch hot parts of the machine.
TECHNICAL DATA
Product name
Model
IR-DRYER3000.2
Nominal power supply [V]/
Frequency [Hz]
Rated power [W]
3 x 1100
Time scope [min]
0-99
Temperature range [°C]
40-100*
Temperature adjustment
YES*
Weight [kg]
47
* Temperature depends on the distance between IR emitter and workpiece
SCOPE OF THE APPLICATION
The IR emitter is designed for drying all materials used in bodywork repairs.
The user is liable for any damage resulting from non-intended use of the device!
BERORE THE FIRST USE
Upon receipt of the goods, check the packaging for defects and open the packaging if there are no damages.
If the packaging is damaged, please contact your transport company and distributor within 3 days, and
document the damages as detailed as possible. Do not turn the package upside down! When transporting
the package, please ensure that it is kept horizontal and stable.
DISPOSING OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition!
INSTALLING THE APPLIANCE
POSITIONING THE MACHINE
The machine should be positioned on a dry and stable surface, vertically so as to prevent movement during
operation. The machine should be positioned on a flat, level surface, with sufficient load capacity for the
machine and its contents. Ensure unobstructed access to the electricity plug at all times. Make sure the
power source reflects the parameters on the rating plate! Prior to first use remove and wash all elements
and wash the entire machine.
MACHINE OPERATION – BASICS
IR-DRYER3000.2 | IR-DRYER3000.1 | IR-DRYER2000.1
Device description
2
1
1.
2.
3
3.
4.
4
5
5.
6.
6
7.
7
8
8.
10
INFRARED PAINT DRYER
IR-DRYER3000.1
IR-DRYER2000.1
IR-DRYER2000.2
IR-DRYER1000
230~/50
3 x 1100
2 x 1100
2 x 1100
0-99
0-99
0-60
40-100
40-100*
40-100*
YES
YES*
YES*
48
39
15
IR unit
Unit support
Actuator
On/Off switch
Lever
Support post
Bottom frame
Wheels
Rev. 26.11.2018
CONTROL PANEL DESCRIPTION
IR-DRYER3000.2
1
2
4
5
1100
IR-DRYER3000.1
0-60
1
40-100*
YES*
2
14
3
9
10
11
IR-DRYER2000.1
1
2
3
5
7
9
11
13
OPERATING PRINCIPLE
1.
Assemble the device in accordance with the diagram and position it correctly.
2.
Then connect to power supply and turn on.
3.
Use the buttons to set the device operating time.
4.
IR-DRYER3000.1 and IR-DRYER2000.1 models have a temperature adjustment feature. Use buttons to
set the temperature on the IR-DRYER3000.1 model, and use function buttons to set the temperature
on the IR-DRYER2000.1 model.
5.
Then select the emitters to be switched on.
6.
Once the device has been positioned correctly, activate it using the start button. To deactivate the
emitters, press the stop button. When not in use device off and disconnect it from the power source.
To adjust the position of the IR unit, pull the lever on the frame of the device. To adjust the angle of the
emitter, loosen the levers on the sides, align at the required angle and tighten.
Rev. 26.11.2018
3
1.
Time display
2.
Button for setting time "+"
3.
Button for setting time "+"
4.
Lamp selection
5.
Start
6
6.
Stop
1.
Time display
2.
Temperature display
3.
Work mode selector: pulsating
4.
Work mode selector: constant
5.
Buttons for setting time" "+" and "-"
6.
Buttons for setting temperature: "+" and "-"
4
5
7.
Start
6
8.
Stop
5
6
9.
Emitter selector: emitter 1
7
10. Emitter selector: emitter 2
8
11. Emitter selector: emitter 3
1.
Voltmeter
2.
Time display
3.
Button for setting time: "+"
4.
Button for setting time: "-"
4
5/6. Emitter selector
7.
Function: RUST PROOF PRIMER
6
8.
Function: PRIMER
8
9.
Function: PRIMARY FILLER
10
10. Function: TOP COAT
12
11. Function: SECONDARY FILLER
12. Function: VARNISH
14
13. Start
14. Stop
11
Publicidad
Tabla de contenido
