Applying The Cuff - Health Plus BPW-HP010 Manual De Instrucciones

APPLYING THE CUFF

1. Remove all watches, wrist
jewelry, etc. prior to
attaching the wrist
monitor. Clothing sleeves
should be rolled up and
the cuff should be
wrapped around bare
skin for correct
measurements.
2. Apply cuff to left wrist
with palm facing up as
shown in Fig. A.
3. Make sure the edge
of the cuff is about
1/4"~1/2" (1 cm) from the
palm as shown
in Fig. B.
Fig. A
Fig. B
15
4. In order to insure
accurate measurements,
fasten the hook and
loop strap securely
around your wrist so
there is no extra space
between the cuff and the
wrist as shown in Fig. C.
If the cuff is not wrapped
tight enough, the
measurement values will
not be accurate.
5. If your physician has
diagnosed you with poor
circulation in your left
arm, place the cuff
around your right wrist
as shown in Fig. D.
Fig. C
Fig. D
16