Data Transfer; Application (App) - LaserLiner CompactLine-Laser G360 Manual De Instrucciones

Data transfer

The device features a Bluetooth
transfer to mobile devices with a Bluetooth
or tablet).
The system prerequisites for a Bluetooth
http://laserliner.com/info?an=ble
The device can set up a Bluetooth
compatible devices.
The range is set to a maximum distance of 10 m from the terminal device
and greatly depends on the ambient conditions such as the thickness and
composition of walls, sources of interference as well as the transmit / receive
properties of the terminal device.
Once it has been activated, Bluetooth
the radio system is designed with exceptionally low power consumption.
A mobile device can link up to the active measuring device via an app.

Application (app)

An app is required to use the Bluetooth
app from the corresponding stores for the specific type of terminal device:
!
Make sure that the Bluetooth
is activated.
After starting the app and activating the Bluetooth
can be set up between a mobile device and the measuring device. If the app
detects several active measuring devices, select the matching device.
This measuring device can be connected automatically the next time it
is switched on.
* The Bluetooth word mark and the logo are registered trademarks of Bluetooth SIG Inc.
®
Additional functions via the app
The app offers a range of additional functions. If it is not possible to control
your device via the app for technical reasons, reset the device to the factory
20
EN
* function that enables wireless data
®
* interface (such as a smartphone
®
* connection are specified at
®
* connection with Bluetooth 4.0
®
* remains switched on indefinitely as
®
* function. You can download the
®
* interface of the mobile device
®
* function, a connection
®