Prepare Your Router For Firmware Recovery-Mac - Kyocera KR1 Manual De Instrucciones

To assign the Static IP address, enter the following
6.
and
Default gateway
IP address:
Subnet mask:
Router:
Ensure that you saved changes by clicking the
Prepare Your Router for Firmware Recovery–MAC
Using the tip of a paperclip, press and hold the
1.
simultaneously plugging in the power supply via the power adapter receptor.
values provided below:
192.168.0.2
255.255.255.0
192.168.0.1
Receptor for Power
RESET Button
IP address
Apply Now
button, while
RESET
LAN Ports
10
, ,
Subnet mask
button.