Andset Enu; Andset Etting; Ring Volume; Low Battery - GE 28861 Manual De Instrucciones

Handset Menu
Handset Setting
Ring Melody
5 ringer tones are available for selection. The default setting is Melody 1.
1. Press the menu/ok button.
. Press the 5 or 6 button to select SETUP HS and press the menu/ok button.
3. Press the 5 or 6 button to select RING MELODY and press the menu/ok button.
4. Press the 5 or 6 button to hear and select the desired ring melody.
5. Press the menu/ok button to confirm the setting.
6. Press the

Ring Volume

5 ring volumes are available for selection. The default setting is Volume 5. The ringer
can be disabled by pressing the * button for 1.5 seconds while phone is in idle mode,
the screen displays the
1. Press the menu/ok button.
. Press the 5 or 6 button to select SETUP HS and press the menu/okbutton.
3. Press the 5 or 6 button to select RING VOLUME and press the menu/ok button.
4. Press the 5 or 6 button to hear and select the desired ring volume,.
5. Press the menu/ok button to confirm the setting.
6. Press the
Note: For the cordless handset, the intercom ring volume cannot
be adjusted, but it can be deactivated.

Low Battery

Setting the warning beep to ON will alert you when the cordless handset battery is
low. The default setting is ON.
1. Press the menu/ok button.
. Press the 5 or 6 button button to select SETUP HS and press menu/ok button.
3. Press the 5 or 6 button button to select TONES and press menu/ok button.
4. Press the 5 or 6 button button to select LOW BATTERY and press menu/ok
button.
5. Press the 5 or 6 button to select ON or OFF.
16
button to return to idle mode.
icon. Press and hold * button again to enable the ringer.
button to return to idle mode.