Buffalo NFINITI Manual Del Usuario página 4

EN
Installing Client Manager
During setup you can choose to install Buffalo's Client Manager software.
This utility lets you survey and connect to any supported wireless networks.
It also allows for connection and configuration via AOSS (AirStation One
Touch Secure System) and WPS (Wi-Fi Protected Setup), provided these
methods are supported by your Router.
Using Client Manager To Connect To Your Wireless Network
The next section of the wizard guides you through setting up a wireless con-
nection with Client Manager. The process differs depending on your OS.
Client Manager 3 for XP/2000
Connect with AOSS (Fig: 3)
• From the Status Screen, select the Profiles tab.
• Click the AOSS button on the Client Manager's screen. The AOSS wizard will
appear.
• Now, press the AOSS button on the Router/Access Point. Hold it down until
the AOSS LED begins to flash. Once AOSS is complete (about 30 seconds),
the connection is archived as a profile for later use. To minimize Client
Manager to the system tray, click the 'X' in the top right corner.
Connect Manually (Fig:3)
• Click the Scan tab in Client Manager. It will show you a list of available
networks.
• Choose the network you want to connect to and click Connect.
• If the chosen wireless network is encrypted, select the Encryption Method,
enter one or more encryption keys, and click Connect.
Fig: 3
2
2
3