Publicidad
Idiomas disponibles
Idiomas disponibles
with the + and - symbols on the bottom of the battery housing. Push the upper housing back on
to the lower housing and replace the 1/2-inch bolt and neoprene washer.
3. Flash Tube Replacement
a. Open the battery housing by removing the 1/2-inch bolt and neoprene washer.
b. Bend the upper housing out slightly on each side and pull the lower housing out.
High voltages are present inside the light assembly. Wait at least five minutes after shutting off
the power before servicing this unit.
c. Remove the screws located at the bottom of the dome.
d. Gently lift the dome away.
e. Grasp the flash tube by its base and pull it out of the socket, using a gentle "rocking" motion.
Insert the new flash tube.
f. Place the dome over the base, aligning the screw access holes.
g. Replace the screws in the bottom of the dome.
h. Push the upper housing back onto the lower housing and replace the 1/2-inch bolt and neo-
prene washer.
i. Test the light for proper operation.
D. Replacement Parts.
Description
Flash Tube Assembly
Dome, Amber
Dome, Blue
Dome, Red
Dome, Green
Dome, Clear
Caution
Part Number
K8107215A
K8263079A
K8263079A-01
K8263079A-02
K8263079A-03
K8263079A-04
-2-
Publicidad
