Osd Settings - Auria EQ2367 Guia Del Usuario

OSD Settings

This function will into the sub-page ( Shown in Pic 6 ) to adjust display's
function for OSD.
OSD Position : Press button + or - to select between horizontal and
vertical OSD Position adjustment.
Horizontal : To horizontally adjust the OSD position.
+ : move OSD to the right, - : move OSD to the left.
Vertical : To vertically adjust the OSD position.
+ : move OSD up, - : move OSD down.
Transparency : To adjust the Transparency of the OSD image.
OSD Time Out : To automatically turn off On Screen Display(OSD)after a
preset period of time.
Setup
This function will into the sub-page ( Shown in Pic 7 ) to adjust display's
function for OSD.
Language : To allow users to choose from available languages.
Audio：To adjust the volume of speaker output.
When press Input Select change Input signal to VGA or DVI and HDMI.
Input :
HDMI-Audio Select : The default setup is Digital Audio. When you use
DVI to HDMI cable to plug into the HDMI connector, you must to set the
audio select to Analog Audio.
DCR: To turn On or Off the DCR function(dynamic contrast ratio).
Reset: To recall the default values.
Pic 6
Pic 7
7