Cleaning And Maintenance - Cuisinart Purxium CAP-1000 Manual De Instrucciones

4-STAGE 360 DEGREE AIR INTAKE
H13 HIGH-GRADE HEPA FILTRATION SYSTEM
• HIGH-GRADE HEPA FILTERS (4) –
H13 high-grade HEPA filters capture up to 99.9% of airborne particles 0.1 Micron
or larger including bacteria and various contaminants
• ACTIVE CARBON FILTERS (4) –
Captures up to 99.9% of unwanted particles including cooking odors, smoke and
VOCs 0.1 Micron or larger
• REMOVABLE, REUSABLE METAL PRE-FILTERS (4) –
Captures larger airborne particles such as dust and pet dander

CLEANING AND MAINTENANCE

To get the most out of your Purxium™ Air Purifier, it's best to clean the washable
pre-filters once a month or more often, depending on where the air purifier is placed
and if you have pets. The HEPA H13 filters should be cleaned once a month using
the brush attachment from a vacuum.
1. Unplug the power cord from the unit and from the outlet. The metal pre-filters
are to be hand-washed only. If the pre-filters are fairly clean, wash each one
with warm soapy water. If the pre-filters are very dirty, you may need use a soft
brush to gently clean them. Make sure the pre-filters are completely dry before
placing back into the unit.
2. Remove the HEPA H13 and active carbon filters as described on page 4.
3. The best way to clean the HEPA H13 filters is to use a vacuum cleaner with the
brush attachment. Gently run the brush attachment along the white side of the
filter only. You do not need to vacuum the active carbon filter on the other side
of the HEPA H13 filter.
6