Polyurethane
sheath
Guiding
Half -shell
Safety
cable
Fastening
cable
Spring
Anti fall
fixation
Position
Blocking
loop
Cable
indicator
cone
Safety
guide
trigger
INSTRUCTIONS FOR USE:
Insert the QUICKLOCK ref. 1009728 into the hole by pulling on the trigger (compression of the spring).
Before introducing it, check that the 2 half-shells are perfectly parallel (see figure below).
Push the QUICKLOCK into the hole to half-way along the position indicator. Release the trigger and exert a slight
traction.
Once the anchor has been introduced, attach your connector.
The QUICKLOCK must be perfectly positioned.
DEPTH
Check that the depth indicator (1) is introduced
INDICATOR
halfway into the hole.The cables of the
half-shells must be symmetrical (see photos).
Check the blocking hold by exerting a light
traction on the QUICKLOCK loop.
5