Software Update; Firmware Update - Jabra ANG001 Manual De Instrucciones

Software
The software used for configuration and viewing
measure-ments is installed with the included USB key.
When the software installation is completed, open the
software and click on "User Manual" in the left menu to
download the user manual in your language.

Software update

1. Click on "About Noise Guide"
under setup in the left side menu.
2. Click on "Software update".

Firmware update

1. Click on "Device Info" under set up in the left side
menu of the software.
2. Click on "Check for firmware updates..." in the green
box on the right side.
3. Follow the instructions on your screen to update the
firmware.
We strongly advise you to check for updates frequently
to make sure you have the latest versions of both soft-
ware and firmware installed.
1. USB port to extract log data from the internal memory
of the Jabra Noise Guide and offline configuration via
the included USB memory stick.
NOTE! The Jabra Noise Guide does not log any data
directly on the USB memory stick.
2. USB micro entrance for connecting
the Jabra Noise Guide to the power adaptor or a PC.
– Connect your Jabra Noise Guide to a PC
To ensure that the software and firmware is up to
date, please start out by checking for updates via the
software. It is important that you first update your
software and then update the internal firmware in the
Jabra Noise Guide afterwards.
Quick star t · Jabra Noise Guide · UK
2
1
2