Getting Started; Charging The Battery; Switching On And Off - Iqua BHS-333 Guia Del Usuario

BHS-333_Headset_UG_EN.fm Page 6 Wednesday, April 25, 2007 12:39 AM

Getting Started

Charging the battery

Before using BHS-333, you must charge it for approximately 2 hours. When the battery is fully
charged, it provides up to 6 hours of talk time and up to 150 hours of standby time.
Always use the charger provided in the sales package.
1. Connect the charger cable to BHS-333.
2. Plug the charger into a wall socket. The green light will turn on.
3. When the battery is fully charged, the green light will turn off.

Switching on and off

To switch on BHS-333
When the headset is powered off, press the Multifunction -button until you can hear a sound
and the green light flashes.
To switch off BHS-333
When the headset is powered on, press and hold the Multifunction -button until you can hear
ascending sound and the green light flashes once and turns off.
Pairing the Bluetooth headset to a Bluetooth mobile phone
Pairing is the process for linking BHS-333 with your Bluetooth enabled mobile phone.* After
this process is completed, you can use the BHS-333 with the paired mobile phone. If you want
to use the bhs-333 with another mobile phone, you must repeat the pairing process. Even
though BHS-333 can be paired with up to 8 compatible phones it can only be connected to
Copyright © 2007 Iqua Ltd
6