Tabla de contenido
Publicidad
FEATURES
Programming track numbers
You can select up to 50 tracks and store them in the memory in a desired
sequence. You can store any track more than once.
1 Select a track with ∞ or §.
2 Press PROGRAM to store the track.
y
is shown and P with the number of
PROGRAM
stored tracks is displayed.
3 Select and store all desired tracks in this way.
4 If necessary, press 9 to stop normal playback.
Press 2; to start playback of the programme.
. yPlayback of the programme starts.
• To add additional tracks to your programme,
press 9 to stop playing the programme and
continue with step 1.
• You can review the programme by pressing PROGRAM for more than 3 sec-
onds.
yAll stored tracks are displayed in sequence.
Clearing the programme
1 If necessary, press 9 to stop playback.
2 Press 9 to clear the programme.
yCLr is displayed,
PROGRAM
the programme is cleared.
• If you press
and there is no track
PROGRAM
selected, SEL is displayed
Notes:
The programme will also be cleared if you interrupt the power supply
or open the CD lid or if the set switches off automatically.
After storing 50 tracks, FULL is displayed.
TITLE
PROG
disappears and
PROG
FEATURES
Storing the last position played-RESUME
You can store the last position played. When restarting, playback continues
from where you have stopped.
1 Switch the slider to RESUME during playback to
activate RESUME.
y
is shown.
RESUME
2 Press 9 whenever you want to stop playback.
3 Press 2; to resume playback.
yPlayback continues from where you have
stopped.
• To deactivate RESUME, switch the slider to OFF.
y
disappears.
RESUME
Locking all buttons-HOLD
You can lock all buttons of the set. When you press any key, no action will be
executed then.
• Switch the slider to HOLD to activate HOLD.
y
is shown and all buttons are locked.
HOLD
When pressing any key, HoLd is
displayed.
• To deactivate HOLD, switch the slider to OFF.
y
disappears.
HOLD
O F F • R
ES U M E •
HO LD
TITLE
RESUME
TITLE
HOLD
Publicidad
Tabla de contenido
