7. Insert one Wood Dowel (N) into each
of the pre-drilled holes on the top
edges of the Assembly from step 6.
Then locate Center Shelf (D), from the
inside, attach the Center Shelf (D)
using Bolts (L) and Washers (M)
through the pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
8. Insert one Wood Dowel (N) into each
of the pre-drilled holes. Push the Left
Side Panel (E) and Right Side Panel (F)
snug to the Top Panel (G) and the
completed assembly from step 7. Make
sure the Wood Dowels are seated in
the pre-drilled holes. Insert Bolts (L)
and Washers (M) into the holes in the
mounting blocks.
HAND TIGHTEN ONLY.
E-3
Center Shelf
N
N
Top Panel
L
M
N
L
M
N
N
E
N
Left Side
Panel
L
M
N
D
N
A
Right Side
N
Panel
G
L
M
F
N
N