Product Specifications; Packing List - Inateck UA1005 Manual De Instrucciones

Note
1. Mostly power source is not needed when UA1005 works with
2.5"hard drive, but it must be applied when UA1005 works with
3.5"hard drive.
2.Make sure data access and transfer are stopped when remove
the hard drive enclosure from computer, otherwise data loss
might happen.
3.Hard drive will automatically start sleep mode if idle state lasts
30 minutes, when LED flashes each three seconds. Data access
to the drive will restore operational mode.

Product specifications

Product name
Product type
material
Weight
Color
Supported drives interface
Supported of drives
Hot plug，plug&play
Licenses
Measurements
Supported OS

Packing list

Inateck UA1005
Instruction manual
Power adatper
2
USB 3.0 to SATA Adapter
Inateck UA1005
ABS plastic
33.6
black
SATA III，II，I
2.5"&3.5" SSD/HDD
supported
CE, FCC
70x28x17mm
Windows XP/ 7/8/10；Mac9.0 or above；Linux
X1
X1
x1