Publicidad
Idiomas disponibles
Idiomas disponibles
PR Series
The PR range is a series of wall speakers designed with a woofer from 103mm to 120mm and a 13mm tweeter.
The PR series is the perfect choice for the distribution of microphone calls and background music both for
restaurants or commercial stores. The mounting frame is made of high quality ABS. The grille is made of metal.
The PR is available in black / white.
SAFETY PRECAUTION
• Keep this manual for future reference.
• When cutting the mounting hole for the speaker, make sure there is sufficient clearance behind the panel (no
obstructions like A/C channels, power lines etc).
• Do not use nails, adhesives or other unauthorized devices. Long-term use and vibrations can make it fall
easily.
• Take care of your speaker wires, they should be free of damage. Damaged speaker wires might result in poor
sound quality and can damage amplifiers.
• Only use accessories specified by the manufacturer.
• Make sure the mounting panel can support the speakers weight.
• Use sufficient amount of speakers to avoid dead spots.
• No mains power shall be connected to the loudspeakers, doing so will damage the speaker.
• This apparatus should only be serviced by qualified personnel. If not warranty might be void.
• Use cable of the right gauge, certainly for long runs.
• Use cables with clear color indication and maintain polarity throughout the whole system.
• Avoid loud feedback from microphones, this can damage your speaker.
• Please check the units condition after unpacking. If the outside of the carton box has been damaged, inform
your shipper immediately.
WARRANTY INFO
The warranty for hidden defects can only be considered if they appear within the 24-month warranty period.
The warranty is not valid in case of misuse, wear, power surges, improper packaging or shipping, improper use
or storage and failure to comply with Audibax recommendations. The product must be returned in the original
packaging with proof of purchase made by an authorized distributor of Audibax.
CONNECTION
USER GUIDE
Fasten the bracket to on the wall by 2 pcs screws
Screw the two knobs
When mounting the panel, check for cables or other obstructions behind the mounting wall.
Ensure that the mounting structure is able to safely support the weight of the speaker.
Connect the speaker cable to
the terminal("+"to"+","-"to"-"+)
2
Publicidad
