Leifheit AQUA POWERVAC Manual De Instrucciones página 16

REMOVING AND CLEANING THE CLEANING ROLLER
Figure 19
Remove roller cover (12) in order to remove the cleaning
roller (20).
the cover.
Figure 20
Using the roller holder (19), remove the cleaning roller (20)
at the edge.
Figure 21
roller cover (12) under running water.
CAUTION: To avoid the formation of odour, remove
the cleaning roller after use and rinse out.
Insert only the completely dried cleaning roller
back in the appliance.
CLEANING THE VACUUM CHANNEL
Figure 22
on the nozzles (18) and vacuum channel (16) using a moist
cloth.
trade or ordered from our customer services.
INSERTING THE CLEANING ROLLER AND CLOSING
THE ROLLER COVER
Figure 23
not charging.
First insert the cleaning roller (20) in the round mount
and then insert the roller holder (19) in the guide.
Figure 24
Insert the tabs of the roller cover (12) at the bottom end
it engaging
16
AUTO-WASH PROGRAM
to the fresh water tank.
Figure 25
Close the tank cover (23) and insert the fresh water tank
Figure 26
Vacuum mode button I/II (2) for 3 seconds and then let go
Figure 27
switches off.
and wash-out.
DISASSEMBLING THE HANDLE
Figure 28
ance.
-