Changing The Filter - SPIT 1630P Instrucciones Para El Manejo

Insert paper filter bag
4
NOTE: Only use paper filter bags for dry vacuum cleaning
Slide the flange completely over the suction
3
aperture.
Place the rotary slider in the suction aperture
with the mark 4 ▲ pointing upwards.
Place the upper section on the container
and close the side latches.
2
1
Insert PE emptying and disposal bag
NOTE: Only the vacuum cleaners class m and H with special containers and rotary
slider in the suction aperture are suitable for the use of PE Emptying and
disposal bags.
4
Place the rotary slider in the suction aperture
with the mark 4 l pointing upwards.
Slide the flange completely over the suction
3
aperture and place the upper bag opening over
the edge of the container.
Place the upper section on the container and
close the side latches.
2
operating the rotary slider:
1
Push the rotary slider from the inside to
the outside 1, turn through 180° 2
(see mark 4) and then push inwards again
from the outside through the suction spigot 3.

CHANgINg THE fILTEr

Changing the folding filter
Shake the folding filter cassettes before changing them.
Turn the lock on the latch Z through 90° in a counter-clockwise direction with a coin or
similar object and push the latch to the rear.
Fold the hood up.
Immediately isolate the folding filter cassettes Ⓒ that you have removed in a dust-tight
plastic bag and dispose of properly in accordance with the stipulations.
Insert new folding filter cassettes.
Lift the locking bracket up, fold the hood down and click in place with light pressure.
12