Dyna-Glo DGPH301BL Manual Del Propietário página 11

ASSEMBLY INSTRUCTIONS
11. Install the knob (KK) and
long stem lighter assembly
screw (LL) as illustrated in figure 11. Take the
hook at the other end of the
stem lighter assembly
hole in the control box assembly (I) as
illustrated in figure 11A. Slide the hooks
attached to the bottom of the front panel (H)
into the holes on the bottom plate (M) as
illustrated in figure 11B.
Hardware Used
KK
Knob
Screw M4 X 10
LL
Chain and
MM
Long Stem
Lighter Assembly
Philips
JJ
screwdriver
12. To secure the unit, please use four nails
M8x100 (not included) to nail the unit to
the ground.
chain and
(MM) using M4x10
chain and long
(MM) and attach it to the
x 1
x 1
x 1
x 1
11
LL
KK
MM
H
11A
11B
12
11
I
M