Midas MR18 Guia De Inicio Rapido página 10

18 MR18
DIGITAL iPAD/TABLET MIXER MR18 Controls
(7) (9)(8) (10) (6) (11)
(1)
(12)
(5)
(13)
(4)
(2) (3)
(1)
(EN) Step 2: Controls INPUTS accept balanced and
unbalanced XLR and ¼ " plugs.
(2)
OUT L & R jacks send the main mix
signal to PA or monitor speakers
via XLR cables.
(3)
HEADPHONE jack accepts a
¼ " TRS plug for connecting a pair
of headphones.
(4)
PHONES LEVEL knob determines
the output of the headphones jack.
(5)
POWER switch turns the power on
and off . The LED on the main input
panel will light when the unit is
powered on.
(6)
USB port (type B) accepts a USB
cable for connection to a computer
for multi-channel audio and
MIDI recording. Up to 18 audio
channels can be simultaneously
recorded, and 18 channels are
available for playback. The mixer
application allows assignment
of channels for recording and
playback. 16 channels of MIDI I/O
can also be transmitted on the
same USB connection. Check the
product page on midasconsoles.
com to download the required
(Windows*) driver and the full
manual for a comprehensive
explanation of the interface.
*Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Quick Start Guide 19
(7)
ETHERNET port allows the
mixer to be controlled via LAN or
connected Wifi router.
(8)
RESET button resets the console to
default network parameters when
held for 2 seconds. When held for
10 seconds, all console functions
are reset to factory default status.
(9)
REMOTE switch selects between
Ethernet, Wifi client, or Access
Point. See the Network Connection
chapter for details.
(10)
MIDI IN/OUT jacks send and
receive MIDI signals to and from
external equipment. See the MIDI
Implementation chart for details.
(11)
ULTRANET port allows connection
of BEHRINGER P16-M personal
monitoring mixers or P16-D
distribution hubs.
(12)
AUX SEND jacks send your
monitor mixes to active stage
monitors or headphone mixers via
XLR connectors.
(13)
Inputs 17 and 18 accept balanced
¼ " cables for connecting line-level
sources. These inputs have limited
processing compared to the other
input channels.