Midas MR18 Guia De Inicio Rapido página 12

22 MR18
DIGITAL iPAD/TABLET MIXER MR18 Network Connection
Getting Started
(EN) Step 3: Network
First Wifi remote connection to your
Connection
MR18 mixer
1. Download and install the remote
control app for your device.
• Android smartphones/tablets:
M-AIR Android from the Google
Play* store
• Apple iPad: M-AIR for iPad from
the Apple* App store
• PC: M-AIR EDIT for
Windows, Mac or Linux from
midasconsoles.com
2. Set the REMOTE switch on your
MR18 mixer to ACCESS POINT mode
and power on the mixer.
3. Reset the mixer's network settings
to default values by holding the
RESET button for 2 seconds. This is
located in the small hole above the
Wifi icon and requires a paper clip
or similar tool to reach.
4. Switch your remote control device
on and open the network settings.
Android smartphones/tablets:
1. Start the Settings/Wireless &
Networks dialog on your
Android system.
Switch "Wifi " on.
2.
3. Click on "Wifi " to select a network.
From the list of networks, select
your mixer's name, e.g. "M18-
19-1B-07". After a few seconds,
the status should change to
"Connected".
4. Open your M-AIR for Android
app and it will show similar
information:
• Mix Access = All
• IP Address = 192.168.1.1
• Wifi Lock = None
• Wifi connected to
MR18-19-1B-07
5. You may choose to lock the
connection to this specifi c Wifi
network if you want to ensure that
your device cannot automatically
connect to another network while
you are controlling your mixer.
6. Click on "Connect" and tap on the
mixer's name in order to connect
the app with your mixer. Note - if
a warning pops up telling you
that the mixer fi rmware is not
supported, it is recommended to
update the fi rmware to the latest
version (see the MR18 pages on
midasconsoles.com for details).
You can, however, choose to
connect anyway.
7. Once the app is connected to
your mixer, all parameters
will be loaded automatically.
Enjoy exploring all mixing
functions of your mixer remotely!
Apple iPad: PC: M-AIR EDIT for Windows, Mac or Linux
1. Start the Settings/Wifi dialog on 1. Open the Wireless Network
your iOS. Connections dialog on your
operating system.
2. Switch "Wifi " on.
2. Make sure the "WLAN" or "Wifi "
3. Select your mixer's name
adapter is switched on.
from the list of networks, e.g.
"MR18-19-1B-07". After a couple of 3. View the list of wireless networks
seconds, the status should change and select your mixer's name, e.g.
to "Connected", indicated by a "MR18-19-1B-07". After a couple of
check mark. seconds, the status should change
to "Connected", indicated by a
4. Open your M-AIR for iPad app
check mark.
and it will show any MR18 mixers
("Devices") found in that network, 4. Open your M-AIR Editor for Win/
with their IP address, which in this Mac/Linux and click on "Setup".
case is 192.168.1.1. The list will show any MR18 mixers
found in that network, with their
5. Tap on the mixer's icon to connect
name and IP address, which in this
the app with your mixer.
case is 192.168.1.1.
Note - if a warning pops up telling
you that the mixer fi rmware is not 5. Click on your mixer's name,
supported, it is recommended to e.g. "MR18-19-1B-07", and confi rm
update the fi rmware to the latest to synchronize from mixer to PC in
version (see the MR18 pages on order to connect the app with your
midasconsoles.com for details). mixer. If a warning pops up telling
You can, however, choose to you that the mixer fi rmware is not
connect anyway. supported, it is recommended to
update the fi rmware to the latest
6. Once the app is connected to
version (see the MR18 pages on
your mixer, all parameters
midasconsoles.com for details).
will be loaded automatically.
You can, however, choose to
Enjoy exploring all mixing
connect anyway.
functions of your mixer remotely!
6. Once the app is connected to
your mixer, all parameters will
be transferred automatically.
Enjoy exploring all mixing
functions of your mixer remotely!
Quick Start Guide 23